H300 Exhibit No. 7 - The Gridiron Pendulum The world-changing Gridiron Pendulum and testing by way of chimney stack Perhaps the most astonishing feature of John Harrison’s Wooden Regulator, showcased in the previous H300 Exhibit No. 6 - The Wooden Regulator, is its gridiron pendulum. Probably more than any other, this invention truly represents the inventive genius, determination and scrappy resourcefulness of the incomparable Harrison. It is also the invention that arguably changed the world, as it facilitated the accuracy of Harrison’s regulator to the point that he could calibrate his sea clocks to a greater degree of accuracy than was previously possible. Thus, it was this invention that facilitated Harrison's later triumph. Without this achievement at this time, would Harrison have given up the pursuit of making a mechanical timekeeper accurate enough to determine longitude at sea, or run out of time to do so before he died? Whatever the case, without the gridiron pendulum, global navigation would have had to rely upon dead reckoning for a bit longer than it did. This exhibit tells the story of how Harrison achieved this scientific breakthrough using only the rooms of his North Lincolnshire home, homemade instruments and a neighbour’s chimney set against the starry night sky. Compensating for chaos Clockmakers had long been plagued by the effects of temperature on the length of the pendulum. Typically, pendulums were made of a single metal, usually brass. When it got hotter, the metal would expand in length; conversely, when it got colder, the metal would contract and therefore shorten. To solve this problem, Harrison first gauged the temperature compensation of a traditional brass pendulum by observing the effects of warmth and cold on his two identical Wooden Regulators, which he had placed in adjacent rooms. To differentiate the temperature in each room, he banked up the fire and closed the windows in one room, while in the other room, he let the fire go out and opened all the windows to the cold, frosty air. Next, he observed how the metal of the brass pendulum expanded in the clock in the heated room and contracted in the clock in the cold room. He then reversed these effects by heating up the contracted pendulum and freezing the expanded one. In this way, he was able to observe and precisely measure the effects of the change in temperature upon the metallic properties of the brass pendulum.[1] Harrison then studied the expansion properties of steel in the same way and was able to work out that these could counter the contraction properties of brass. For instance, he observed that as the temperature increased, steel would expand proportionately less than brass. At the time, there was a general awareness of the expansion properties of metals but little to no knowledge about the exact expansion properties of different kinds of metals in comparison with one another. By precisely measuring the expansion properties of steel and brass, Harrison had made a scientific breakthrough. An ingenious solution Harrison then set about designing a solution that could prevent or offset changes in the properties of the metal of the pendulum. To do this, he constructed a new type of pendulum made of more than one metal. Instead of a single brass rod, this new pendulum had a symmetrical system of five metal rods, comprising a central steel rod with two brass rods on one side and two steel rods on the other. The overall length of the pendulum in relation to the bob remained constant because the three steel rods under tension were countered by the upward movement of the two brass rods under compression. Harrison’s new pendulum represented the first use of bi-metals in any mechanism ever. Because it resembled a gridiron, it became known as the gridiron pendulum. To see it in action, watch the video in H300 Exhibit No. 6 – The Wooden Regulator, in which horologist and collector Dr John C Taylor OBE explains how the pendulum was made, as a computer animation reveals how it is put together and functions. Testing by way of a chimney stack How did Harrison test the long-term accuracy of his twin Wooden Regulators and ensure that the gridiron pendulums were keeping time as they should? The first step was to access an accurate time base to calibrate the clocks, which leads to the question, ‘How did Harrison figure out the correct and exact time?’ Nowadays, we take our access to the correct time for granted. We can look at our phones or find a running clock or digital time display almost anywhere in our homes or in public spaces. Harrison did not have this luxury. In Harrison’s day, sundials were still relied upon as the primary source for accurate time setting. Even if a person had been fortunate enough to be able to afford a (then) cutting-edge pendulum clock made by one of the leading London clockmakers of the day, it would still have had to be set locally by reference to a sundial. However, access to sundials was limited, and their time is only readable on a clear, sunny day. They were also tricky to read because the time indicated on the dial represents solar time. Therefore, an Equation of Time had to be used to calculate the difference between solar and local mean time.[2] To establish an accurate time base, Harrison and his brother looked to the stars in the night sky. Instead of using a telescope, they used a simple but effective homemade astronomical tracking instrument to pinpoint the stars’ positions: the border of a windowpane and the silhouette of the neighbour’s chimney stack. Harrison knew that one day on earth measured 23 hours, 56 minutes and 4 seconds long – a sidereal day. He also knew that because of the earth’s rotation, a star should transit exactly 3 minutes and 56 seconds earlier than the night before. In her book Longitude, science writer Dava Sobel recounts that ‘Night after night, they [the Harrisons] marked the clock hour when given stars exited their field of view behind the chimney...”[3] By conducting these late-night tests, the Harrisons were able to gauge the time to within a fraction of a second. They were also able to determine that their temperature-compensating gridiron pendulums never erred more than a single second in a whole month. This was an astonishing level of accuracy for the time. Result: The world’s most accurate clock When Harrison’s Wooden Regulator was made, it became the world’s most accurate clock, and it remained so for the next 150 years. With this clock, Harrison also created a whole new kind of pendulum clock – one that could run for another 40–50 years with no maintenance, thanks to its low friction, maintaining power, newly refined grasshopper escapement, and gridiron pendulum.[4] Moreover, his design utterly surpassed the capabilities of timekeepers made by the best and brightest of his contemporaries in London. What is even more remarkable is that he accomplished all this using homemade instruments, and without access to resources such as materials, machinists and labour – all of which were readily available to clockmakers in London. He also accomplished all that he did in relative isolation in Barrow upon Humber in North Lincolnshire, quite removed from the beating heart of the clockmaking world, London. Many horologists believe that this isolation was key to Harrison’s early success. Essentially, his location and lone status as an outsider gave him the creative space to problem solve and experiment with new methods without interference, fear of judgement, and the financial pressure to turn a profit – all part and parcel of operating as a clockmaker in London. Following the successful completion of testing, Harrison kept his set of two Wooden Regulators, including the one exhibited here on Clocktime, in his possession, and used them as standards against which to test his sea clocks.[5] With this design, Harrison single-handedly ushered in a horological revolution – one that would drive horological, navigational and wider scientific development. The only problem was that, in 1726, no one yet knew it, except of course Harrison and his brother James. Now fully confident in his abilities to crack the problem of accurately determining longitude at sea, Harrison got to work. Within just a few years, in 1730, he visited London to discuss his ideas and methods his first sea clock, which would come to be known as H1. In 1736, he completed the production of H1 and permanently moved to London to secure financing for the further development of his sea clocks. For the story of Harrison’s gutsy move to London – then the bustling capital of the clockmaking world – and his fortuitous meeting with London’s most successful and widely respected clockmaker, go to H300 Exhibit No. 8 – London calling. Dr Kristin Leith, Curator of Clocktime Adapted November 2026 Original published June 2024 *This exhibit is part of Harrison 300: The making of the wooden clock that changed our world, a new digital exhibition exclusively displayed on Clocktime from 24 November 2026 – 24 March 2027. You can experience the exhibition in its entirety here. End Notes [1] Note that simple properties such as length, volume, density, spring stiffness, strength of material and viscosity of lubricants are all vulnerable to temperature fluctuations, which can affect the accuracy of a clock. [2] You can read more about sundials in the Clocktime article The first timekeepers: Telling time before the pendulum clock. [3] Sobel 2011, 72. Thanks to precision timekeepers, we know now that one day on Earth is actually 23 hours, 56 minutes and 4.09 seconds long, thus 0.09 seconds longer than was known in Harrison’s day. [4] Garnier and Hollis 2018, 381, Catalogue No. 119; Sobel 2011, 70–73. [5] Garnier and Hollis 2018, 381. The gridiron pendulum from Harrison’s second precision regulator is in the Leeds City Museum, Leeds, UK. In 1728, Harrison also made a longcase with wooden movement. The movement (Object Number: L2015-3436) and case (Object Number: L2015-3438) are displayed in the Clockmakers' Museum at the Science Museum in London. References Garnier, R. and L. Hollis. 2018. Innovation & Collaboration: The early development of the pendulum clock in London. Isle of Man: Fromanteel Ltd. Sobel, D. 2011. Longitude: The true story of a lone genius who solved the greatest scientific problem of his time. London: Harper Perennial. Further Reading Andrews, W. (editor). The Quest for Longitude (Proceedings of the Harvard University Longitude Conference of 1993). Cambridge, MA: Harvard University Press. Betts, J. 2006. Time Restored. Oxford/Greenwich, London: Oxford University Press/National Maritime Museum. Betts, J. 2023. John Harrison and the Quest for Longitude (2nd edition). Greenwich, London: National Maritime Museum. Carter, J. 2021. The John C Taylor Collection: Part II (Selling Exhibition Catalogue, Carter Marsh & Co.). Winchester: Carter Marsh & Co. King, M. Forthcoming. Clocking on with John Harrison [working title]. Quill, H. 1966. John Harrison: The man who found longitude. New York, NY: Humanities Press. Quill, H. 1971. ‘The grasshopper escapement’ in AHJ VII/4: 288–296. Roberts, D. 2003. Precision Pendulum Clocks: The question for accurate timekeeping in England. West Chester, PA: Schiffer Publishing. Taylor, J. C. and K. Leith (with contributions from T. Phillipson and K. Neate). 2020. The Luxury of Time: Clocks from 1500–1800. Isle of Man: Fromanteel Ltd.