H300 Exhibit No. 5 - A whole new kind of clock A whole new kind of clock: the making of Harrison’s Wooden Regulator The major breakthrough that John Harrison’s Wooden Regulator represents in terms of horological, navigational, and wider scientific development cannot be overstated. As he did with his earlier wooden clocks, Harrison produced the Wooden Regulator at his home in Barrow upon Humber and in relative isolation, with only the help of his brother James.[1] The brothers used homemade instruments and unorthodox methods, pushing the capabilities of Harrison’s design every step of the way. At the time, Harrison was still working full time as a joiner and carpenter. In 1726, when the brothers completed and successfully calibrated this Wooden Regulator and its identical mate, Harrison claimed that it was the most accurate clock in the world, as it never erred more than a single second in a whole month.[2] Inner beauty In many respects, the outer appearance of Harrison’s Wooden Regulator makes it the most understated of the timekeepers exhibited on Clocktime. This is because it is a calibration instrument: its presentation (case and dial) favours function over form. It also looks very much like the earlier longcases that Harrison made.[3] However, its unpretentious presentation manages to quietly signal the complex beauty and significance of what lies within. The entirety of the longcase’s large soft-wood frame is ebonised, and it is possible that Harrison concocted his own finish. There is an almost complete absence of metal adornment, excepting the silver chapter ring. All other decorative elements are made of wood or have been hand painted onto the case itself. They include gilt wood finials atop the domed-top caddy case, wooden pilasters with gilt wood capitals on either side of the dial, and the gilt wood lenticle inset in the trunk door. The remaining decoration consists of understated stylised flowers – all delicately hand painted onto the case by the Harrisons, exercising balanced restraint upon the hood, dial, trunk and base, and using a minimal colour palette of gilt and red. The contrast provided by the red and gilt flowers against the ebonised wood is quietly striking and impactful. Gilt floral motifs also cover the wooden break-arch dial plate. Additionally, there is a gilt-painted putti (representation of a naked cherub) at the dial’s centre. On other clocks, these areas would typically be occupied by gilt-cast spandrels and a gilt metal centre disc with engraving. On this longcase, however, the hand-painted floral motifs stand in as substitutes for these traditional, usually costly adornments. The dialplate itself fits directly onto the frame – a design detail that allowed Harrison to forgo the use of dial pillars (which were compulsory for clocks with metal dial plates). The restored dial features a silver chapter ring with Roman numerals, a calendar aperture above the VI, and a seconds aperture below XII. There is also a maintaining power lever at the top corner on the side of the III. In the trunk door is a gilt wood lenticle which provides a glimpse of the (then) cutting-edge pendulum swinging back and forth within. The trunk has been constructed with raised panels to allow room for the oscillation of the pendulum’s bob. Just above the lenticle, behind a replica glazed panel, is an Equation of Time table written in Harrison’s hand. James Harrison’s main responsibility was to help his brother with the creation of the clock cases. His name, James Harrison Barrow, is signed in gold powder on the dial plate just above XII. John’s signature, Jon Harrison Barrow, is engraved on the chapter ring below, around the VI. Pushing the capabilities Housed within this longcase are several innovations, each of which represents a horological breakthrough in its own right. They include a wooden movement with a new kind of escapement, maintaining power and anti-friction rollers, as well as the gridiron pendulum, a new kind of temperature-compensating pendulum. Expanding upon what he had learned from the Brocklesby Turret Clock project (see H300 Exhibit No. 3), Harrison harnessed the potential of different woods for the construction of the Wooden Regulator’s movement while retaining the use of brass for the escape wheel. He used oak for the wheels and the self-lubricating hardwood lignum vitae for the bearings and bushes. He also used lignum vitae for his roller pinions, a design detail that further reduced friction. The Wooden Regulator’s movement represents the culmination of Harrison’s bold experimentation with wood for his clock movements – a wholly new approach to clockmaking in and of itself. Harrison also redesigned the wooden grasshopper escapement that he had created for the Brocklesby Turret Clock. For this scaled-down version, he altered the design by using only one gold pin for the two pivoting wooden pallets and their two damper weights. However, it is Harrison’s gridiron pendulum that most distinguishes the Wooden Regulator from his previous clocks. This is the feature that facilitated such astonishing accuracy in a clock that, once completed, never erred more than a single second in a whole month. This was a whole new kind of pendulum – one that could compensate for fluctuations in temperature. For the story of how Harrison achieved this, working in his home with homemade astronomical instruments, go to H300 Exhibit No. 7 – The gridiron pendulum. Thus, Harrison’s ability to innovate and invent is even more impressive: he conducted his experiments and perfected his methods in relative isolation, away from the collective knowledge, resources, and hustle and bustle of London, then the clockmaking capital of the world. Go to the next exhibit H300 Exhibit No. 6 – The Wooden Regulator to explore the clock itself in stunning high-resolution detail. Dr Kristin Leith, Curator of Clocktime Adapted November 2026 Originally published June 2024 *This exhibit is part of Harrison 300: The making of the wooden clock that changed our world, a new digital exhibition exclusively displayed on Clocktime from 24 November 2026 – 24 March 2027. You can experience the exhibition in its entirety here. End Notes [1] Betts 2023, 43–45; Garnier and Hollis 2018, 381, Catalogue No. 119; Taylor et al. 2020, 1; Matthew King forthcoming. Note that Betts and Sobel focus on the development and testing of Harrison’s chronometers, providing only summary detail about the earlier development (prior to 1730) of Harrison’s Wooden Regulators. Matthew King’s forthcoming book, Clocking On with John Harrison (working title), will go into comparatively more detail about the design and testing of Harrison’s wooden clocks made between 1713 and 1728. It will also draw upon King’s 40 years of experience with woodworking and 20 years of experience working with Harrison clocks and researching the clockmaker’s methods. King is a widely known and respected maker of Harrison replica clocks. [2] Garnier and Hollis 2018, 381. The gridiron pendulum from the second in Harrison’s set of two wooden regulators was eventually removed and sold, later ending up in the Leeds City Museum, Leeds, UK. A third Harrison longcase of similar case design, which was made in 1728, is displayed in the Clockmakers' Museum at the Science Museum in London (Object Number: L2015-3438). John's brother James made its case, which is signed Barrow, James Harrison in the arch of the dial and James Harrison 3rd 1728 Barrow on the calendar wheel. John made its movement, and there is an Equation of Time table written in his own hand that is displayed within the door of the longcase. The table is corrected for the change to the Gregorian calendar in 1752. [3] Betts 2023, 43. References Betts, J. 2023. John Harrison and the Quest for Longitude (2nd edition). Greenwich, London: National Maritime Museum. Garnier, R. and L. Hollis. 2018. Innovation & Collaboration: The early development of the pendulum clock in London. Isle of Man: Fromanteel Ltd. King, M. Forthcoming. Clocking on with John Harrison [working title]. Sobel, D. 2011. Longitude: The true story of a lone genius who solved the greatest scientific problem of his time. London: Harper Perennial. Taylor, J. C. and K. Leith (with contributions from T. Phillipson and K. Neate). 2020. The Luxury of Time: Clocks from 1500–1800. Isle of Man: Fromanteel Ltd. Further Reading Andrews, W. (editor). The Quest for Longitude (Proceedings of the Harvard University Longitude Conference of 1993). Cambridge, MA: Harvard University Press. Betts, J. 2006. Time Restored. Oxford/Greenwich, London: Oxford University Press/National Maritime Museum. Quill, H. 1966. John Harrison: The man who found longitude. New York, NY: Humanities Press. Quill, H. 1971. ‘The grasshopper escapement’ in AHJ VII/4: 288–296. Roberts, D. 2003. Precision Pendulum Clocks: The question for accurate timekeeping in England. West Chester, PA: Schiffer Publishing.